MadeSolid CastSolid printing information

How CastSolid burns out

CastSolid has two burn stages which are necessary for the cleanest burnout. The first phase, at 540F, is the initial combustion of the resin where the majority of material is removed. The second phase is at 1350F, which serves to remove any residual carbon from the original outgassing phase. Please refer to the heat map, as an incorrect heat schedule can expand and may damage your final product. Find a step by step breakdown below:

  • Hold at 300F for 30 minutes to an hour.
  • Ramp up over 30 minutes to 540F.
  • Hold at 540F for 3 hours.
  • Ramp up to 1350F for 1 hour.
  • Hold at 1350F for 4 hours.
  • Ramp down to 1000F  for 2 hours.
  • Hold at 1000F for 1 hour.

heatschedule_1350_600px

Recommended Investment: Satin Cast, Satin Cast Xtreme, Ultra-Vest

CastSolid works well with all of the following metals: Gold, Silver, Bronze, Brass, Magnesium, Pewter, Aluminum

Specific printer detail:

Asiga Freeform Pico
Profile:                           Clear Resin Profile

Deep Image 5
Layer Resolution(Z):      50um Z
XY Resolution:               50um XY Base
Layer:                             20 seconds
Slice Layer:                    8 seconds

Form 1
Layer Resolution:            0.1mm, 0.05mm, 0.025mm
Color Settings:                Grey

LittleRP, Standard DLP 2300 lumen projector, focused to an image size 60x44mm (58 micron xy pixels)
Layer Resolution(Z):      25um Z
Base Layer:                   3.5 seconds per layer for first 3 layers
Regular Layer:               2.5 seconds per layer
Z Lift Distance:               4
Z Lift Speed:                   200
Z Retract Speed:            100

 

Leave a Reply

Your email address will not be published. Required fields are marked *

XHTML: You can use these tags <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>