MadeSolid printing information

The MadeSolid resins are created to not be limited to one single printer, however have good results with many SLA and DLP printers. The material properties include a unique matt finish, less viscosity and easier to clear from the vat.

The improved V2 MS Resin shows the following upgrades:
• Higher detail: XY resolution is much sharper
• Sharper colors: richer colors to reveal the finer parts of the print
• Better for the resin vat: significantly less clouding

Specific printer detail:

Deep Image 5
Layer Resolution(Z):          50um Z
XY Resolution:                   50um XY
Base Layer:                        20 seconds
Slice Layer:                        8 seconds

Form 1
Layer Resolution:               0.1mm, 0.05mm, 0.025mm
Material/Color Settings:      Grey

LittleRP
Standard DLP 2300 lumen projector, focused to an image size 60x44mm (58 micron xy pixels)

• MS Red
Layer Resolution(Z):         100um Z
Base Layer:                       10.0 seconds per layer for first 5 layers
Regular Layer:                   3.3 seconds per layer

Layer Resolution(Z):          50um Z
Base Layer:                       7.5 seconds per layer for first 5 layers
Regular Layer:                   2.0 seconds per layer

• MS Resin Black
Layer Resolution(Z):         100um Z
Base Layer:                       5.0 seconds per layer for first 5 layers
Regular Layer:                  1.65 seconds per layer

Layer Resolution(Z):          50um Z
Base Layer:                       4 seconds per layer for first 5 layers
Regular Layer:                  1.3 seconds per layer

Leave a Reply

Your email address will not be published. Required fields are marked *

XHTML: You can use these tags <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>